Designing a Production System for Woven ‘Stagen’ Products: a Community Service Practice in a Weaving Community
DOI:
https://doi.org/10.55927/ajcs.v3i1.7837Keywords:
Production System, Stagen Weaving, Community BusinessAbstract
A robust production system needs to be implemented across all business scales, including small-scale enterprises managed by community groups. This forms the foundation for the development of more competitive businesses. As reported in this paper, a community service program was elaborated to design a production system for a stagen weaving business group located in Moyudan, Sleman, Indonesia. To implement this production system, there are five main stages: situational analysis, production system design, workshop, implementation, and monitoring and evaluation. A pilot project was tested on four weavers with distinct characteristics. The results indicate that each of the four weavers produced different stagen patterns with significant revenue gains for weaver 1 and weaver 2 amounting to more than IDR 500.000 (360.24 meters and 237.43 meters, respectively). This program successfully achieved specific targets in line with the scope.
Downloads
References
Aditiawati, P., Astuti, D. I., Suantika, G., & Simatupang, T. M. (2016). Local Potential Development Of Panawangan Village As A Model Of Vocational Village In The Community Empowerment And National Food Security Improvement. Jurnal Sosioteknologi, 15(1), 59–67. http://www.ciamiskab.go.id
Bellinda Ayustina, Arief Nurdini, & Ardhy Lazuardy. (2023). Perencanaan Jadwal Induk Produksi Pada Produk Tempe Di Rumah Tempe Indonesia. Jurnal Ilmiah Teknik, 2(1), 60–75. https://doi.org/10.56127/juit.v2i1.497
Ginting, R. B., Zikkrullah, M., Program, R., Peternakan, S., Sains, F., & Teknologi, D. (2018). Studi Manajemen Produksi Usaha Peternakan Kambing Di Desa Deli Tua Kecamatan Namorambe Kabupaten Deli Serdang Sumatera Utara. In AgroveterineR (Vol. 6, Issue 2).
Kembang Hapsari, R., Wahyu Azinar, A., & Sugiyanto. (2018). Rancang Bangun Sistem Produksi Dan Persediaan Umkm. Jurnal Nasional Teknologi Terapan, 2(1), 81–88.
Nasir, M., Saputro, E. P., & Handayani, S. (2015). Manajemen Pengelolaan Limbah Industri. Benefit Jurnal Managemen Dan Bisnis, 19(2), 143–149.
Pristianingrum, N. (2017). Peningkatan Efisiensi Dan Produktivitas Perusahaan Manufaktur Dengan Sistem Just In Time. Jurnal Ilmiah Ilmu Akuntansi, Keuangan Dan Pajak, 1(1), 41–53.
Sodiq, A., Suwarno, S., Fauziyah, F. R., Wakhidati, Y. N., & Yuwono, P. (2017). Sistem Produksi Peternakan Sapi Potong di Pedesaan dan Strategi Pengembangannya. Jurnal Agripet, 17(1), 60–66. https://doi.org/10.17969/agripet.v17i1.7643
Subroto, A. M., & Kawet, L. (2015). Evaluasi Kinerja Supply Chain Manajemen Pada Produksi Beras Di Desa Panasen Kecamatan Kakas. J. Sumarauw. Evaluasi Kinerja Supply… 653 Jurnal EMBA, 3(1), 653–662.
Susanti, D. A., Nurhayati, E., & Kurniawan, V. R. B. (2019). Profil Adopsi Teknologi E-Commerce Usaha Kecil Menengah (Ukm) Pada Himpunan Industri Mebel Dan Kerajinan Indonesia (Himki) Yogyakarta. IEJST (Industrial Engineering Journal of The University of Sarjanawiyata Tamansiswa), 3(2), 77–83. www.depkop.go.id
Sutarjo, G. A., & Sudibyo, R. P. (2020). Peningkatan Kapasitas Produksi Ikan Melalui Penerapan Manajemen Kualitas Air Dan Probiotik Di Kelompok Raja Oling Kecamatan Sukun Kota Malang. Abdi Insani, 7(1), 38–43. https://doi.org/10.29303/abdiinsani.v7i1.302
Tyoso, J. S. P., & Haryanti, C. S. (2020). Perlukah Mempertahankan Keunggulan Kompetitif oleh UMKM? (Studi Kasus UMKM Semarang). Jurnal Maksipreneur: Manajemen, Koperasi, Dan Entrepreneurship, 9(2), 123. https://doi.org/10.30588/jmp.v9i2.496
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 V. Reza Bayu Kurniawan, Syamsul Ma'arif, Buntoro Irawan, Agung Priyanto, Fransiska Hernina Puspitasari, Sibgha Bashir
This work is licensed under a Creative Commons Attribution 4.0 International License.
.png)
