Realtime Filtering of Waste Separate Equipment in Irrigation Channels

Sumardi Sadi; Iqbal Majid  Zulvikar

doi:10.55927/fjcis.v1i2.1708

Authors

Sumardi Sadi Fakultas Teknik, Universitas Muhammadiyah Tangerang
Iqbal Majid Zulvikar Fakultas Teknik, Universitas Muhammadiyah Tangerang

DOI:

https://doi.org/10.55927/fjcis.v1i2.1708

Keywords:

Garbage Separator, NodeMCU ESP 8266, Blynk

Abstract

There are still many people who are not aware of disposing of waste in its place, including littering, one of which is in irrigation canals which can clog the channels and the many types of waste that can be found. To reduce waste in irrigation canals, an automatic waste separator was made. This automatic waste separator aims to transport waste in irrigation canals using two stages of conveyors, namely conveyor 1 for conveying lines from under water and conveyor 2 for waste separation lines, after which the waste is separated. according to the category, namely by using an inductive proximity sensor for Metal Waste and will be separated by using a servo motor, for non-metallic waste will be allowed to run on conveyor 2 then the waste is put into a trash can which can be monitored by ultrasonic sensors to see the height of the contents of the bin the trash. Monitoring this garbage separator uses the NodeMCU ESP 8266 WIFI as a connector with the BLYNK application to see whether the contents of the trash can are full or not by the cleaning officer on duty then the full trash can will be replaced with an empty trash can with monitoring control via BLYNK.

Downloads

Download data is not yet available.

References

Gunawan, I., Akbar, T., & Giyandhi Ilham, M. (2020). Prototipe Penerapan Internet of Things (Iot) pada Monitoring Level Air Tandon Menggunakan Nodemcu Esp8266 Dan Blynk. Infotek : Jurnal Informatika Dan Teknologi, 3(1), 1–7. https://doi.org/10.29408/jit.v3i1.1789

Mulyati, S., & Sadi, S. (2018). Internet of Things (Iot) pada Prototipe Pendeteksi Kebocoran Gas Berbasis MQ-2 dan SIM800L. Jurnal Teknik, 7(2), 64–72.

Puadi, O., & Hambali, H. (2022). Perancangan Alat Pemilah Sampah Otomatis. JTEIN: Jurnal Teknik Elektro Indonesia, 3(1), 1–14.

Putrawan, E., Made, G., Desnanjaya, N., Nyoman, I., Hartawan, B., Komputeri, S., & Stikom Indonesia, S. (2021). Implementasi Alat Pengontrol Pengumpul Sampah pada Irigasi Aliran Air Sawah Menggunakan Mikrokontroler. Jurnal Krisnadana, 1(1), 57–68.

Gunawan, I., Akbar, T., & Giyandhi Ilham, M. (2020). Prototipe Penerapan Internet Of Things (Iot) Pada Monitoring Level Air Tandon Menggunakan Nodemcu Esp8266 Dan Blynk. Infotek : Jurnal Informatika Dan Teknologi, 3(1), 1–7. https://doi.org/10.29408/jit.v3i1.1789

Mulyati, S., & Sadi, S. (2018). Internet of Things (Iot) pada Prototipe Pendeteksi Kebocoran Gas Berbasis MQ-2 dan SIM800L. Jurnal Teknik, 7(2), 64–72.

Puadi, O., & Hambali, H. (2022). Perancangan Alat Pemilah Sampah Otomatis. JTEIN: Jurnal Teknik Elektro Indonesia, 3(1), 1–14.

Putrawan, E., Made, G., Desnanjaya, N., Nyoman, I., Hartawan, B., Komputeri, S., & Stikom Indonesia, S. (2021). Implementasi Alat Pengontrol Pengumpul Sampah pada Irigasi Aliran Air Sawah Menggunakan Mikrokontroler. Jurnal Krisnadana, 1(1), 57–68.

https://www.researchgate.net/profile/I-Gede-Widharma 2/publication/346631120_Sensor_Ultrasonik_dalam_Water_Level_Controller/li ks/5fca59d045851568d13af3c0/Sensor-Ultrasonik-dalam-Water-Level-Controller.pdf

Setiadi, D., & Abdul Muhaemin, M. N. (2018). PENERAPAN INTERNET OF THINGS (IoT) PADA SISTEM MONITORING IRIGASI (SMART IRIGASI). Infotronik : Jurnal Teknologi Informasi Dan Elektronika, 3(2), 95. https://doi.org/10.32897/infotronik.2018.3.2.108

Widharma, I. G. S., Saputra, K. D. W., Purnamayana, I. M. S., & ... (2020). Sensor Ultrasonik dalam Water Level Controller. No …, December.

Prayetno, E., Hekso Yunianto, A., Fatiroh, I., & Asyhar, R. (2020). Perancangan Alat Penghisap dan Pengangkat Sampah pada Permukaan Laut Berbasis Mikrokontroler. Jurnal Sustainable: Jurnal Hasil Penelitian Dan Industri Terapan, 9(1), 23–30. https://doi.org/10.31629/sustainable.v9i1.1983

Mudiarta, Made; Janardana, Gusti Ngurah; Wijaya, I. wayan A. (2020). Rancang Bangun Sistem Monitoring Ketinggian Sampah Dan Tingkat Gas Metana Pada Bak Sampah Berbasis IoT. Spektrum, 7(2), 22–28.

Martono et al. (2019). 296449-Sistem-Pembuangan-Sampah-Otomatis-Berbas-2Fa43Add. 12(2), 229–240.

Endhartana, B. (2020). Rancang Bangun Simulasi Alat Pengangkut Sampah Pada Sungai Berbasis Internet of Things (IOT). Jurnal Online Mahasiswa Bidang Teknik Elektro, 01(01), 2–12.

Ditya, D. N., Suheri, D. A., Sandi, K., & Sari, L. R. (2017). Rancangan Alat Pengangkut Sampah Tenaga Angin (Pesta) Sebagai Upaya Pengurangan Sampah Perairan. Teknologi Dan Pusat Terapan, I(I), 29–36.

Agustiarmi, W., & Darni, R. (2018). Jurnal Sains dan Informatika. Jurnal Sains Dan Informatika, 4(1), 50–56. https://doi.org/10.22216/jsi.v4i1

Abimanyu, K., Rohman, S., Setya, A., & Octa, P. (2019). Garbage Carrier Roboboat Based On Image Processing. Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali Dan Elektronika Terapan, 7(1), 25–41. https://doi.org/10.34010/telekontran.v7i1.1636