Analysis of the Risk of Work Accidents in High-Story Building Construction Projects using the FMEA (Failure Modes and Effects Analysis) Method

Meylinda Sabrinawati; I Nyoman Dita Pahang Putra

doi:10.55927/fjmr.v3i5.9520

Authors

Meylinda Sabrinawati Bachelor of Civil Engineering, UPN “Veteran” Jawa Timur, Indonesia
I Nyoman Dita Pahang Putra Bachelor of Civil Engineering, UPN “Veteran” Jawa Timur, Indonesia

DOI:

https://doi.org/10.55927/fjmr.v3i5.9520

Keywords:

Risk, Work Accident, FMEA

Abstract

A construction project is a complex and exciting process, starting from planning and design, through to implementation and finishing. The process of building a construction project always has risks at every stage of its implementation. To prevent and minimize risks that could cause work accidents and losses on the project, it is necessary to carry out a work accident risk analysis on the project. This research carried out a work accident risk analysis on the Joint Lecture Building and FISIP Laboratory Phase 2 UPN "Veteran" East Java Construction Project using the FMEA method. The aim is to identify the risks of work accidents that could occur in building construction projects and to determine the severity level, incidence rate, detection level, and risk priority number (RPN) in these projects. The results of the research show that the risk of work accidents with the highest Risk Priority Number (RPN) value occurs in foundation structure work with the risk of workers being injured by these materials with RPN value of 174,857.14. Work on strengthening foundation structures with the highest RPN values requires the greatest attention and risk control measures.

Downloads

Download data is not yet available.

References

Afnella, W., & Utami, T. N. (2021). Analisis Risiko Kecelakaan Kerja Metode Hira (Hazard Identification and Risk Assessment) Di Pt. X. PREPOTIF : Jurnal Kesehatan Masyarakat, 5(2), 1104–1012. https://doi.org/10.31004/prepotif.v5i2.2187

Ardiningrum, A., Fitriyani, F., & Gusti, A. (2023). Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) pada Bagian Boiler di PLTU Teluk Sirih. Jurnal Keselamatan Kesehatan Kerja Dan Lingkungan, 4(2), 151–169. https://doi.org/10.25077/jk3l.4.2.151-169.2023

Choiruddin, H., & Dani, H. (2023). Manajemen Risiko Kecelakaan Kerja Menggunakan Metode FMEA Pada Proyek Pembangunan Gedung At-Taawun Universitas Muhammadiyah Surabaya. Teknik Sipil, 86–92. https://ejournal.unesa.ac.id/index.php/viteks/article/view/55392/44686

Darsini, Rio Adhi Prakoso, & Sari, M. P. (2022). MANAJEMEN RISIKO KESELAMATAN DAN KESEHATAN KERJA PADA PROYEK KONSTRUKSI BENDUNGAN XYZ DENGAN METODE FMEA. Jurnal Inkofar, 6(1), 27–32. https://doi.org/10.46846/jurnalinkofar.v6i1.213

Gulo, T. (2020). Strategi Penanganan Risiko Terjadinya Kecelakaan Kerja di PT. Ikad dengan Metode Hor (House Of Risk). Jurnal Syntax Transformation, 1(10), 759–765. https://doi.org/10.46799/jst.v1i10.182

Khoiri, H. A., & Setyawan, H. (2023). Manajemen Risiko K3 dengan Metode HAZOP pada UPT XYZ Kabupaten Magetan. JURNAL TEKNIK INDUSTRI, 13(1), 75-80. Doi: 10.25105/jti.v13i1.17518.

Ihsan, F. A., & Nurcahyo, B. C. (2022). Analisis Risiko Kecelakaan Kerja Menggunakan Metode FMEA pada Proyek Pembangunan Jalan Tol Ruas Sigli - Banda Aceh Struktur Elevated. Jurnal Teknik ITS, 11(1), E49–E55. https://doi.org/10.12962/j23373539.v11i1.85958

Mu’adzah, M., & Firmansyah, N. A. (2020). Analisis Enterprise Risk Management Menggunakan FMEA pada PT XYZ. Teknoin, 26(2), 154–164. https://doi.org/10.20885/teknoin.vol26.iss2.art6

Rama, H. F. S., & Bhaskara, A. (2022). ANALISIS RISIKO KECELAKAAN KERJA PADA PROYEK PEMBANGUNAN DENGAN METODE FMEA DAN HAZOP. Rang Teknik Journal, 5(1), 110–115. https://doi.org/10.31869/rtj.v5i1.2844

Sari, I. P., Windusari, Y., Sunarsih, E., Fajar, N. A., Masyarakat, P. M. I. K., Masyarakat, F. K., Sriwijaya, U., Gazali, J. M. Al, & Lama, B. (2024). Faktor Penyebab Kejadian Kecelakaan Kerja Pada Pekerja Perusahaan Tambang di Indonesia: Sistematik Literatur Review. Jurnal Ilmiah Permas: Jurnal Ilmiah STIKES Kendal, 14(2), 677–684. https://journal2.stikeskendal.ac.id/index.php/PSKM/article/view/1845

Savitri, E. D. Y., Lestariningsih, S., & Mindhayani, I. (2021). Analisis Keselamatan Dan Kesehatan Kerja (K3) Dengan Metode Hazard And Operability Study (HAZOP) (Studi Kasus : CV. Bina Karya Utama). Jurnal Rekayasa Industri (Jri), 3(1), 51–61. https://doi.org/10.37631/jri.v3i1.291

Tambunan, H. N., . N., & Sadalia, I. (2021). Analysis of Knowledge, Implementation and Monitoring of K3 on Occupational Health and Safety Management System (SMK3) at Pt. Mujur Lestari Labuhan Batu Selatan. International Journal of Research and Review, 8(12), 404–410. https://doi.org/10.52403/ijrr.20211249

Zuniawan, A. (2020). A Systematic Literature Review of Failure Mode and Effect Analysis (FMEA) Implementation in Industries. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(2), 59. https://doi.org/10.22441/ijiem.v1i2.9862