The Utilization of Rice Sack Waste as a Substitute Material for Fiber in Fiber Tensile Strength

Mas Shobihatul Inaya; Meilinda Eka  Fatmawati; Muhammad Akbar  Febianto; Riska Dwi  Apriliani; Denny Oktavina  Radianto

doi:10.55927/fjst.v2i6.4451

Authors

Mas Shobihatul Inaya Politeknik Perkapalan Negeri Surabaya
Meilinda Eka Fatmawati Politeknik Perkapalan Negeri Surabaya
Muhammad Akbar Febianto Politeknik Perkapalan Negeri Surabaya
Riska Dwi Apriliani Politeknik Perkapalan Negeri Surabaya
Denny Oktavina Radianto Politeknik Perkapalan Negeri Surabaya

DOI:

https://doi.org/10.55927/fjst.v2i6.4451

Keywords:

Composites, Rice Sacks, Fiberglass

Abstract

This research was conducted with the aim of testing the mechanical properties of fiberglass composites made from normal fiberglass and a mixture of used rice sack waste. This research was conducted using two treatments, namely normal fiberglass and mixed fiberglass with waste. The method used is experimental with one repetition. The experimental results show that the tensile strength of lamina composites with polyester resin matrix and used rice sack fiber reinforcement is strongly influenced by fiber orientation. Therefore, mixed fiber specimens with a mixture of used rice sack fiber can be used as an alternative material to replace normal fiber.

Downloads

Download data is not yet available.

References

Caprara, G. V., & Zimbardo, P. G. (2004). Personalizing politics: A congruency model of political preference. American Psychologist. https://doi.org/10.1037/0003-066X.59.7.581

Diener, E. (2000). Subjective well-being: The science of happiness and a proposal for a national index. American Psychologist. https://doi.org/10.1037/0003-066X.55.1.34

Haerani, S., Parmitasari, R. D. A., Aponno, E. H., & Aunalal, Z. I. (2019). Moderating effects of age on personality, driving behavior towards driving outcomes. International Journal of Human Rights in Healthcare. https://doi.org/10.1108/IJHRH-08-2017-0040

Heri Yudiono. 2016. Pemanfaatan Karung Beras Bekas Untuk Panel Komposit Lamina Sebagai Material Alternatif Kuat Dan Tangguh. Laporan Akhir Penelitian Pusat Kajian. Tidak Dipublikasikan. Semarang : FT Universitas Negeri Semarang

Lubis, P. C. (2022). Analisa Pengaruh Variasi Waktu Post Weld Heat Treatment Pada Pengelasan SMAW Baja A36 Terhadap Kekuatan Uji Tarik, Uji Impak, Dan Struktur Mikro. Jurnal Teknik Perkapalan, 10(3).

Lusardi, A., Mitchell, O. S., & Curto, V. (2010). Financial literacy among the young: EvidencAmrullah, U. S., &

Nugroho, R. H. (2018). Optimalisasi Variasi Volume Resin Komposit Serat Limbah Karung Glangsing. Jurnal Energi dan Teknologi Manufaktur (JETM), 1(01), 17-23. ASTM, 1998, Annual Book of ASTM Standart Section 4, Vol.13, ASTM, New York, C 393 – 9

Ruzuqi, R., Maryanto, E. T., & Rahmat, A. (2022). KUAT TARIK BAJA TULANGAN POLOS (STUDI KASUS: PT. GHODY BIMANTARA MANDIRI). Journal Teknik Mesin, Elektro, Informatika, Kelautan dan Sains, 2(1), 9-14.

Sabri, M. F., & MacDonald, M. (2010). Savings Behavior and Financial Problems among College Students: The Role of Financial Literacy in Malaysia | Sabri | Cross-cultural Communication. Crosscultural Communication. https://doi.org/10.3968/j.ccc.1923670020100603.009

Standar Nasional Indonesia (SNI). No. 03 – 1027 – 2006 Lembaran serat krisotil semen rata. Dewan Standarisasi Indonesia.

Sulaeman, B. (2018). Pemanfaatan Limbah Karung Beras. PENA TEKNIK: Jurnal Ilmiah Ilmu-Ilmu Teknik, 3(1), 93-106.

Yudiono, H., Rusiyanto, R., & Kiswadi, K. (2017). Kekuatan tarik komposit lamina berbasis anyaman serat karung beras bekas (woven bag). Jurnal Kompetensi Teknik, 9(2), 1-7.e and implications. National Bureau of Economic Research, 358–380. Retrieved from https://www.nber.org/papers/w15352.pdf