Pengaruh Penambahan Agregat Ban Bekas dan Limbah Botol Kaca Terhadap Karakteristik dan Kuat Tekan Batako

Dedyerianto; La Ode Asmin; La Isa

Authors

Dedyerianto Institut Agama Islam Negeri Kendari, Indonesia
La Ode Asmin Institut Agama Islam Negeri Kendari, Indonesia
La Isa Institut Agama Islam Negeri Kendari, Indonesia

Keywords:

used tires, glass bottles, bricks, compressive strength

Abstract

This study aims to determine the characteristics of the bricks and the percentage of additional shredded used tires and glass powder that meet the minimum compressive strength requirements of solid bricks (SNI-3-0349-1989). This research uses a laboratory experimental method with variations in the percentage of additives from used tires and glass powder. The results showed that by using shredded used tires and glass powder, the three types of aggregates met the quality classification of bricks according to the minimum compressive strength requirements of solid bricks (SNI-3-0349-1989) with quality standard III. The use of used tires and glass powder in bricks as an added material by replacing some of the sand from the ratio can provide a quality standard III in making bricks according to SNI 03-0349-1989. Glass powder and used tires with an average compressive strength of 60.95 kg/cm2, 55.70 kg/cm2 and 45.19 kg/cm2, the three types of aggregates are included in grade III bricks with average compressive strength.

References

Ahmari, S., & Zhang, L. (2012). Production of eco-friendly bricks from copper mine tailings through geo-polymerization. Journal of Construction and Building Material , 29, 323-331.

Ainun, & Nadia. (2014). Beton Normal dengan Menggunakan Ban Bekas Sebagai Pengganti Agregat Kasar. Jurnal Konstruksia , 6 (1).

Chan, C.-M. (2011). Effects of natural fibers inclusion in clay bricks: physic-mechanical properties. Journal of International Journal of Civil and Environmental Engineering , 1, 51-57.

Chusid, M., Miller, S. H., & Rapoport, J. (2009). The building bricks of sustainability. The Construction Specifier , 1, 30 - 40.

Luciana, C. H., Hori, C. E., Reis, M. H., Mora, N. D., & Regina, C. (2012). Characterization of ceramic bricks incorporated with textile laundry sludge. Journal of Ceramics International , 28, 951-959.

Nithiya, R., L, C. A., Vinodh, K. R., & Anbalagan, C. (2016). Experimental investigation on bricks by using various waste materials. International Journal of Latest in Engineering and Technology (IJLTET) , 6 (3), 396 - 402.

Nursyamsi, Indrawan, I., & Hastuty, I. P. (2016). PEMANFAATAN SERBUK KACA SEBAGAI BAHAN TAMBAH DALAM PEMBUATAN BATAKO. Media Teknik Sipil , 14 (1), 84-95.

Premkumar, R., mohideen, J. K., kumar, M. M., moorthi, T. S., & Celestin, X. (2021). Properties and Environmental Features of Bricks Made From Textile Waste Sludge. Journal of Physics: Conference Series (hal. 1-8). IOP Publisihing.

Rochman, M., & Setyo, M. (2019). Potential of Scrap Tires for Useful Material and Product. Lembaga Penelitian dan Pengabdian Masyarakat (LPPM)-ITP.

Teklehaimanot, M., Hailay, H., & Tesfaye, T. (2021). Manufacturing of Ecofriendly Bricks Using Microdust Cotton Waste. Journal of Engineering , 1-10.

Tjokrodimuljo, K. (1996). Teknologi Beton. Yogyakarta: Nafitri.

Turgut, P., & Yesilata, B. (2008). Physico-mechanical and thermal performances of newly developed rubber-added bricks. Journal of Energy and Buildings , 40, 679-688.