Papan Semen Partikel Campuran Kayu Jabon (Anthocephalus Cadamba Miq.) dan Sekam Padi Berdasarkan Variasi  Tekanan Kempa

Irvin Dayadi

doi:10.55927/mudima.v2i7.428

Authors

Irvin Dayadi Universitas Mulawarman

DOI:

https://doi.org/10.55927/mudima.v2i7.428

Keywords:

cement-bonded particleboard, jabon (Anthocephalus cadamba Miq.), rice husk, pressure variation

Abstract

This research aims to determine the quality of cement-bonded particleboard based on variations in pressure from a mixture of jabon (Anthocephalus cadamba Miq.) and rice husks with a ratio of 50:50 at board density target of 1 g/cm³. The pressure variation was 20, 25, and 30 bar for 4 hours, while the catalyst used was Ca(OH)₂. Physical and mechanical properties testing including density, moisture content, water absorption, thickness swelling, MoE, MoR and IBS tests referring to International Standards ISO 8335: 1987 and British Standards BS 5669: 1989. The test results show better quality trends at higher pressures and have met both standards on the physical properties, whereas mechanical properties does not meet both standards.

References

Antara. (2017). Sekam padi ternyata bermanfaat bagi tanaman, begini cara kerjanya. https://bali.bisnis.com/read/20170919/538/772751/sekam-padi-ternyata-bermanfaat-bagi-tanaman-begini-cara-kerjanya

Flores, J. A., Pastor, J. J., Martinez-Gabarron, A., Gimeno-Blanes, F. J., & Frutos, M. J. (2011). Pressure Impact on Common Reed Particleboards Manufacturing Procedure. Systems Engineering Procedia, 1, 499–507. https://doi.org/10.1016/j.sepro.2011.08.072

Frybort, S., Mauritz, R., Teischinger, A., & Müller, U. (2008). Cement bonded composites - A mechanical review. BioResources, 3(2), 602–626.

Fuwape, J. A. (1995). The effect of cement/wood ratio on the strength ptroperties of cement-bonded particleboard from spruce. Journall Tropical Rain Forest Product, 1(1).

Hachmi, C. (1989). Jurnal Forest Product Society. Journal Forest Product Society, 1.

Korai, H. (1999). Dimensional stability and strength properties of particleboard produced by a closed-press system. Journal of Wood Science, 45(5), 402–410. https://doi.org/10.1007/BF01177913

Nemli, G. (2003). Effects of some manufacturing factors on the properties of particleboard manufactured from alder (Alnus glutinosa subsp. Barbata). Turkish Journal of Agriculture and Forestry, 27(2), 99–104. https://doi.org/10.3906/tar-0206-5

Sukartana, P., Rushelia, R. I. M. S. (2000). Resistance of Wood– and Bamboo–Cement Boards to Subterranean Termite Coptotermes gestroi Wasmann (Isoptera: Rhinotermitidae). In P. D. Evans (Ed.), The Australian Centre for International Agricultural Research (ACIAR) (pp. 63–65). Australian Centre for International Agricultural Research (ACIAR).

Pujotomo, I. (2017). Potensi Pemanfaatan Biomassa Sekam Padi Untuk Pembangkit Listrik Melalui Teknologi Gasifikasi. Jurnal Ilmiah Energi Dan Kelistrikan, 9, 126–135.

Rosita, E. (1998). Sifat-sifat papan semen partikel dari campuran jenis kayu merkubung (Macaranga gigantea Muell Arg.), leda (Eucalypstus deglupta Blume), dan meranti merah (Shorea spp). Universitas Mulawarman.

Sastradimadja, E. (1988). Papan Majemuk - Seri Papan Semen. Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Mulawarman.

Vital, B. R., Lehmann, W. F., & Boone, R. S. (1974). How Species and Board Densities Affect Properties of Exotic Hardwood Particleboards. Forest Products Journal, 24(12), 37–45.

Wijoyo, J. (2017). Sifat fisika papan semen partikel limbah serbuk gergaji kayu jati (Tectona grandis). Universitas Mataram.