Productivity Measurement Using the Objective Matrix (OMAX) on the PT XYZ Non Woven Production Floor

Arsyad  Sumantika; Ganda Sirait

doi:10.55927/fjas.v1i6.1866

Authors

Arsyad Sumantika Universitas Putera Batam
Ganda Sirait Universitas Putera Batam

DOI:

https://doi.org/10.55927/fjas.v1i6.1866

Keywords:

Index Value, Non Woven, OMAX, Productivity

Abstract

Productivity is an absolute concern. This relates to the total performance in a company related to the level of efficiency and effectiveness. PT XYZ is a company that produces non-woven disposable clothes. However, in reality, often the targets set are not as expected by the company. The purpose of this study was to measure the productivity level of PT XYZ on non-woven machines. While the method used uses the Objective Matrix (OMAX) and data collection is carried out for 3 months, namely July to September 2022 on the production floor on non-woven machines. with an index value of 320, while in September it was at its lowest point with an index value of 180. This occurred with an increase in total products produced by PT XYZ but on the other hand there was a decrease in the number of hours worked by employees, labor, energy usage, number of hours when there is a breakdown of the machine and the product being repaired.

Downloads

Download data is not yet available.

References

Faris, M., & Helianty, Y. (2015). Usulan Peningkatan Produktivitas Di Lantai Produksi Menggunakan Metode Objective Matrix (OMAX) (Studi kasus di PT Agronesia Divisi Industri Karet). Jurnal Online Institut Teknologi Nasional Jurusan Tehnik Industri No.04, 03(04), 253–263.

Fithri, P., & Firdaus, I. (2016). Analisis Produktifitas Menggunakan Metode ObjectiveMatrix (OMAX) (Studi Kasus: PT. Moradon Berlian Sakti). Jurnal Optimasi Sistem Industri, 13(1), 548. https://doi.org/10.25077/josi.v13.n1.p548-555.2014

Hamidah, N. H., Deoranto, P., & Astuti, R. (2013). Analisis Produktivitas Menggunakan Metode Objective Matrix (Omax): Studi Kasus Pada Bagian Produksi Sari Roti Pt Nippon Indosari Corpindo, Tbk Pasuruan. Jurnal Teknologi Pertanian, 14(3), 215–222.

Khoirunniam, A. (2022). HASIL PRODUKSI DENGAN OBJECTIVE MATRIX. 0000(1985).

Mentari, M., & Anandita, V. (2020). Pengaruh Pelatihan Dan Komitmen Terhadap Produktivitas Kerja Karyawan Pt. Jingga Langit Media. Jurnal Ekonomi Dan Industri, 21(3), 61–72. https://doi.org/10.35137/jei.v21i3.497

Mukti, A. R., A’yun, Q., & Suparto, S. (2021). Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX) (Studi Kasus: Departemen Produksi PT Elang Jagad). Jurnal Teknologi Dan Manajemen, 2(1), 13–18. https://doi.org/10.31284/j.jtm.2021.v2i1.1525

Muliadi. (2019). Peningkatan Produktivitas Kerja Karyawan Melalui Semangat Kerja (Suatu Penelitian pada Koperasi Warga Makmur Unit Marisa Kabupaten Pohuwato). Jurnal Studi Islam, 11(April), 87–104.

Nurmaydha, A., Wijana, S., & Deoranto, P. (2017). ANALISIS PRODUKTIVITAS PADA BAGIAN PRODUKSI GONDORUKEM DAN TERPENTIN MENGGUNAKAN METODE OBJECTIVE MATRIX ( OMAX ) ( Studi Kasus di PGT Sukun Ponorogo Kesatuan Bisnis Mandiri Industri Non Kayu ( KBM-INK ) Perum Perhutani Unit II Jawa Timur ) An Analysis of. 01(December 2012).

Pratama, F. A., & Henny, H. (2018). Analisis Produktivitas Objective Matrix (Omax) Ditinjau Dari Keselamatan Dan Kesehatan Kerja Dilantai Produksi Di Cv. Grand Manufacturing Indonesia. INAQUE: Journal of Industrial & Quality Engineering, 6(2), 1–8. https://doi.org/10.34010/iqe.v6i2.987

Ramayanti, G., Sastraguntara, G., & Supriyadi, S. (2020). Analisis Produktivitas dengan Metode Objective Matrix (OMAX) di Lantai Produksi Perusahaan Botol Minuman. Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), 31–38. https://doi.org/10.30656/intech.v6i1.2275

Saryatmo, M. A., & Gunawan, A. S. (2014). Metode Omax Dan Prism Pt2. Vol. 18(ISSN: 1410-2331), 61–70.