Analysis of Energy Losses in Medium Voltage Distribution Conductors Based on Load Curve: A Case Study on the Sindanglaut Feeder

Pirdo Marriwanto; Haris Tobaristan; Taryo Taryo

doi:10.55927/ijar.v4i8.15162

Authors

Pirdo Marriwanto University of Swadaya Gunung Jati
Haris Tobaristan University of Swadaya Gunung Jati
Taryo Taryo University of Swadaya Gunung Jati

DOI:

https://doi.org/10.55927/ijar.v4i8.15162

Keywords:

Conductor Uprating, Electrical Distribtion, Power Loss, Drop Voltage, ETAP

Abstract

Power losses in electrical distribution systems are a major challenge that can reduce the efficiency of energy delivery. This study focuses on reducing such losses in medium-voltage distribution networks, particularly on the Sindanglaut Feeder at the Ciledug customer service unit of the State Electricity Company. The analysis employed load flow simulations using ETAP 12.6.0 software, with an optimization strategy of increasing the cable cross-section from 150 mm² to 240 mm² to assess its impact on voltage drop and distribution efficiency. Simulation results indicated that, prior to optimization, the average active power was 1.40 kW, reactive power was 5.75 kVar, and voltage drop was 3.28%. After optimization, these values decreased to 1.13 kW, 5.16 kVar, and 2.76%, accompanied by a significant reduction in total power losses. These findings demonstrate that cable size adjustment based on technical analysis is effective in improving distribution system performance and can serve as a reference for developing efficient, data-driven distribution networks.

Downloads

Download data is not yet available.

References

Aziz, A., Farooq, Z., Zahid, H., Marwat, J. K., Awan, A. Z., Khan, R. S., Hussnain, M., Durrani, A. M., & Ahmad, B. (2025). SIMULATION-BASED CONDUCTOR OPTIMIZATION FOR POWER DISTRIBUTION FEEDERS , A COMPARATIVE STUDY USING ETAP. 3(4), 430–444.

Aziz, A., Sadique, U., & Ahmad, M. (2024). Comprehensive Analysis and Optimization of Radial Distribution Feeder using ETAP. International Journal of Research Publication and Reviews Journal Homepage: Www.Ijrpr.Com, 5(April 2024), 6933–6943.

Celik, M. (2024). Optimal Reconfiguration of Medium Voltage Distribution Networks : A MINLP Approach with Power Loss Minimization. 2, 13–22.

Dey, B., Choudhury, A., Kundu, B., Saha, D., Sarkar, S., Roy, A., Basak, R., & Basak, S. (2022). Load Flow Analysis and Transient System Analysis of A Cycle Combined Power Plant Using ETAP Software. SSRN Electronic Journal, 4–9.

Ediwan, E., Muliadi, M., Mahalla, M., Nazaruddin, N., & Mulkan, A. (2021). The Reconfiguration of Network at 20 kV Distribution System Nagan Raya Substation with the Addition of the Krueng Isep Hydroelectric Power Plant. Jurnal Nasional Teknik Elektro, 10(2).

Gao, Y., Kang, B., Xiao, H., Wang, Z., Ding, G., Xu, Z., Liu, C., Wang, D., & Li, Y. (2023). A model for identifying the feeder-transformer relationship in distribution grids using a data-driven machine-learning algorithm. Frontiers in Energy Research, 11(July), 1–18.

Girigoudar, K., & Roald, L. A. (2020). On the impact of different voltage unbalance metrics in distribution system optimization. Electric Power Systems Research, 189.

Jamil, U. (2023). Power Loss Minimization of Distribution Network using Different Grid Strategies. ArXiv.Org.

Liu, N., & Zhao, Y. (2024). Loss reduction optimization strategies for medium and low-voltage distribution networks based on Intelligent optimization algorithms. Energy Informatics, 7(1).

Masdzarif, N. D. I., Ibrahim, K. A., Gan, C. K., Au, M. T., Baharin, K. A., Emran, N. A., & Abidin, Z. Z. (2023). An efficient method for estimating energy losses in distribution’s feeder. Bulletin of Electrical Engineering and Informatics, 12(4), 1919–1928.

Ponce, D., Aguila Téllez, A., & Krishnan, N. (2023). Optimal Selection of Conductors in Distribution System Designs Using Multi-Criteria Decision. Energies, 16(20).

Putri, M., Syahruddin, M., Cholish, C., & Abdullah, A. (2024). Stabilizing Voltage and Managing Power Loss in Medium Voltage Distribution Systems Through Strategic Maneuvers. International Journal of Electrical and Electronics Research, 12(3), 1060–1066.

Putri Politeknik Negeri Medan, M., Putri, M., Hajar, I., & husna, M. (2021). Overcome Voltage Drop By Uprating Conductors Using Etap Software. International Journal in IT & Engineering (IJITE), 9(12), 2321–1776.

Techane, L. B., Salau, A. O., Gebru, Y. W., & Hailu, E. A. (2022). Geographical information system based optimal path routing of distribution networks. Heliyon, 8(5), e09397.

Wahyudi, H. (2024). The Relationship between Electricity Consumption and Economic Growth in BRICS Countries. International Journal of Energy Economics and Policy, 14(2), 349–356.

Wang, X., Chen, W., Tian, R., Ji, Y., & Zhu, J. (2024). Fast power flow calculation for distribution networks based on graph models and hierarchical forward-backward sweep parallel algorithm. Frontiers in Energy Research, 12(August), 1–9.