Graphite-Derived Graphene-Based Composites for Ballistic Body Armor: A Systematic Literature Review

Isya Rahma  Hanifah; Timbul  Siahaan; Edy  Sulistyadi

doi:10.55927/ijar.v5i5.16568

Authors

Isya Rahma Hanifah Defense Industry Study Program, Faculty of Defense Engineering and Technology
Timbul Siahaan Defense Industry Study Program, Faculty of Defense Engineering and Technology
Edy Sulistyadi Defense Industry Study Program, Faculty of Defense Engineering and Technology

DOI:

https://doi.org/10.55927/ijar.v5i5.16568

Keywords:

Ballistic Body Armor , Ballistic Energy Absorption, Defense Materials, Graphene, Graphite-Derived Graphene, Hybrid Composite

Abstract

The increasing development of modern ballistic threats has encouraged the advancement of lightweight and high-performance body armor materials capable of providing effective protection without reducing user mobility. Graphene, a two-dimensional carbon nanomaterial derived from graphite, has attracted significant attention in defense applications because of its exceptional mechanical properties. This study aims to review graphite-derived graphene-based composites for ballistic body armor applications through relevant national and international journals. The reviewed studies were analyzed based on material characteristics, ballistic energy absorption mechanisms, hybrid composite systems, fabrication methods, and development challenges. The results indicate that graphene improves ballistic resistance through stress-wave propagation, crack deflection, and enhanced energy dissipation mechanisms. In addition, graphene-based hybrid composites demonstrate improved ballistic limit velocity and reduced backface deformation compared to conventional ballistic materials. However, challenges such as high production cost, agglomeration, brittleness, and scalability limitations still hinder large-scale implementation. Overall, graphite-derived graphene shows strong potential for future lightweight ballistic body armor applications.

Downloads

Download data is not yet available.

References

Adetayo, A., & Runsewe, D. milola. (2019). Synthesis and Fabrication of Graphene and Graphene Oxide: A Review. Open Journal of Composite Materials, 9, 207–229. https://doi.org/10.4236/ojcm.2019.92012

Ahmed, M. R., Maio, L., & Potluri, P. (2025). Graphene-enhanced epoxy composites: A comprehensive review of dispersion mechanisms, processing strategies, property optimization, characterization and sustainable innovations. Progress in Aerospace Sciences, 158, 1–33. https://doi.org/10.1016/j.paerosci.2025.101142

Alexe, G. G., Carp, G. B., Tiganescu, T. V., & Buruiana, D. L. (2025). Enhancing the Performance of Materials in Ballistic Protection Using Coatings—A Review. Technologies, 14(1), 1–34.

Apriansyah, M., Wangsa, A. G., Ukkasya, M., Fadlun, & Anisah, N. (2024). Study Literatur : Graphene, Nano Teknologi sebagai Material Konstruksi Masa Depan. Bearing: Jurnal Penelitian Dan Kajian Teknik Sipil, 9(1), 1–9.

Ari, A., & Karahan, M. (2024). Relationship Between Elastic Properties and Energy Absorption of Different Types of Aramid and UHMWPE Composites Used in Ballistic Protection. Industria Textila, 75(4), 484–497. https://doi.org/10.35530/IT.075.04.2023137

Asgedom, G., Yeneneh, K., Tilahun, G., & Negash, B. (2025). Numerical and Experimental Analysis of Body Armor Polymer Penetration Resistance Against 7.62 Mm Bullet. Heliyon, 11(e41286), 1–37. https://doi.org/10.1016/j.heliyon.2024.e41286

Atif, R., Shyha, I., & Inam, F. (2016). Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites-A Review. Polymers, 8(281), 1–37. https://doi.org/10.3390/polym8080281

Barbosa, L. C. M., Bortoluzzi, D. B., & Junior, A. C. A. (2019). Analysis of Fracture Toughness in Mode II and Fractographic Study of Composites Based on Elium® 150 Thermoplastic Matrix. Composites Part B: Engineering, 175, 1–22.

Basrani, J., Jain, N. K., Kumar, N., & Sharma, S. (2026). Ballistic Impact Protective Body Armour Vest: A Critical Review. Journal of Advanced Research in Alternative Energy, Environment and Ecology, 13(1 & 2), 251–261. https://doi.org/10.24321/2455.3093.202608

Bekele, M. G., Maru, D. B., & Zelelew, T. M. (2026). Advances in Ballistic and Impact-Resistant Composite Fabrics: A Review. Clean Energy Science and Technology, 4(2), 1–34. https://doi.org/10.18686/cest521

Chen, L., Cao, M., & Fang, Q. (2021). Ballistic Performance of Ultra-High Molecular Weight Polyethylene Laminate with Different Thickness. International Journal of Impact Engineering, 156, 1–28. https://doi.org/10.1016/j.ijimpeng.2021.103931

Chih, A., Ansón-Casaos, A., & Puértolas, J. A. (2017). Frictional and Mechanical Behaviour of Graphene/UHMWPE Composite Coatings. Tribology International, 116, 295–302.

Garjati, V. N., Rizkia, V., Anggraeni, N. A., & Muslimin. (2023). Studi Pengaruh Penambahan 5wt.% dan 10wt.% Serat Pelepah Salak pada Manufaktur Komposit Epoxy berpenguat Serat Kevlar dan Serat Karbon dengan Metode Vacuum Assisted Resin Transfer Molding (VARTM) untuk Aplikasi Rompi Tahan Peluru. Journal of Applied Mechanical Technology, 2(2), 1–11. https://doi.org/10.31884/jamet.v2i2.32

Gaur, P., Sharma, P., Gupta, K., Khan, T., & Aloufi, M. (2024). A Comprehensive Review of Graphene-Based Nanomaterials for Ballistic and Impact Resistance in Defence Applications. Social Science Research Network, 1–53. https://ssrn.com/abstract=4681898

Hassin, M. S., Faruk, M. O., Ali, M. I., & Begum, S. (2024). Evaluation of Physical and Mechanical Properties of Graphene Oxide Reinforced Epoxy/Kevlar Hybrid Composites. Hybrid Advances, 6, 1–8. https://doi.org/10.1016/j.hybadv.2024.100217

Herdiyanti, H., Dadang, S. P., & Setiawan, J. (2016). Karakterisasi densitas grafit sebagai kandidat bahan reaktor temperatur tinggi. Pengelolaan Instalasi Nuklir, 9(16), 37–43.

Lestari, A., Melati, L. T., Kasim, Jupriyanto, & Deksino, G. R. (2023). Ceramic Armor as Protective Material in Defense Industry Product: A Literature Review. MOTIVECTION: Journal of Mechanical, Electrical and Industrial Engineering, 5(1), 101–112.

Miao, Y., Yang, D., & Xin, B. (2021). Anti-Ballistic Properties of Aramid Fabrics and Composites: A Review. AATCC Journal of Research, 8(4), 20–27. https://doi.org/10.14504/AJR.8.4.4

[Naveen, J., Jawaid, M., Goh, K. L., Reddy, D. M., Muthukumar, C., Loganathan, T. M., & Reshwanth, K. N. G. L. (2021). Advancement in graphene-based materials and their nacre-inspired composites for armour applications—A review. Nanomaterials, 11(5), 1–17.

Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrahim, M. N. F., Ilyas, R. A., & Sapuan, S. M. (2021). A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications. Polymers, 13(646), 1–42.

Othman, R. N., & Zainudin, A. H. (2021). Tensile Properties of Graphene Epoxy Nanocomposite. Jurnal Kejuruteraan SI, 4(2), 77–83.

Parente, J. M., Nunes-Pereira, J., Silva, A. P., & Reis, P. N. B. (2025). The Effect of Graphene on the Fatigue Response and Failure Mechanism of Composite Materials: A Review. Fatigue and Fracture of Engineering Materials and Structures, 49, 933–962. https://doi.org/10.1111/ffe.70155

Ribeiro, M. P., da Silveira, P. H. P. M., de Oliveira Braga, F., & Monteiro, S. N. (2022). Fabric Impregnation with Shear Thickening Fluid for Ballistic Armor Polymer Composites: An Updated Overview. Polymers, 14(4357), 1–31. https://doi.org/10.3390/polym14204357

Shen, M.-Y., Liao, W.-Y., Wang, T.-Q., & Lai, W.-M. (2021). Characteristics and Mechanical Properties of Graphene Nanoplatelets-Reinforced Epoxy Nanocomposites: Comparison of Different Dispersal Mechanisms. Sustainability, 13(1788), 1–18. https://doi.org/10.3390/su13041788

Singh, H., Budiarto, H. A., Singh, B., Kumar, K., Gupta, R., Bhowmik, A., & Santhosh, A. J. (2025). Graphene for Next-Generation Technologies: Advances in Properties, Applications, and Industrial Integration. Results in Engineering, 27, 1–17. https://doi.org/10.1016/j.rineng.2025.106865

Verma, R. (2025). A Comprehensive Review of Advanced Armor Materials and Emerging Technologies in Ballistic Protection for the Next Generation: Factors, Applications, and Future Prospects. IARJSET, 12(9). https://doi.org/10.17148/iarjset.2025.12911

Vignesh, S., Surendran, R., Sekar, T., & Rajeswari, B. (2020). Ballistic impact analysis of graphene nanosheets reinforced kevlar-29. Materials Today: Proceedings, 45, 1–6. https://doi.org/10.1016/j.matpr.2020.02.808

Vigneshwaran, G. V., Shanmugavel, B. P., Paskaramoorthy, R., & Harish, S. (2020). Tensile, Impact, and Mode-I Behaviour of Glass Fiber-Reinforced Polymer Composite Modified by Graphene Nanoplatelets. Archives of Civil and Mechanical Engineering, 20(94), 1–15.

Wang, L., Xue, X., Wang, T., Qiu, M., Wang, Q., Gao, M., & Zhou, Y. (2025). Research on Impact Resistance of CF/UHMWPE Fiber Interlayer Hybrid Composite Target Plate. Journal of Physics: Conference Series, 3021, 1–8. https://doi.org/10.1088/1742-6596/3021/1/012080

Xie, J., Liu, J., Pan, H., Jiang, C., Gao, B., Jiang, Y., & Feng, Z. (2026). Experimental Study on Mechanical Performance and Blast Resistance of Aramid, Carbon, and UHMWPE Fabrics. Polymers, 18(612), 1–30. https://doi.org/10.3390/polym18050612

Zelelew, T. M., Ali, A. N., Kidanemariam, G., Kebede, G. A., & Koricho, E. G. (2024). The Effect of Nanoparticle Reinforcement on Shear-Thickening Fluid. Journal of Nanotechnology, 2024, 1–18.

Zeng, X., Prakash, P., Hosseini, S., Taheri, M., Mathew, J., Trifoni, E., Levchenko, I., Weerasinghe, J., Prasad, K., & Alexander, K. (2026). Polyimide Reinforced with Graphene/Metal Oxide Nanocomposites: Surface Degradation Study Under Atomic Oxygen. Polymers, 18(522), 1–27. https://doi.org/10.3390/polym18040522