Study of the Effectiveness of Implementing Occupational Safety and Health with the Hazop Method in the Cikarang Industrial Center

Edwina Rudyarti

doi:10.55927/ijsmpe.v1i1.2284

Authors

Edwina Rudyarti Department of Occupational Safety and Health, Medika Suherman University

DOI:

https://doi.org/10.55927/ijsmpe.v1i1.2284

Keywords:

Effectiveness, Application of K3, Hazop, Industry

Abstract

The brick industry center in Cikarang has not implemented Occupational Safety and Health (K3). This is due to the lack of understanding of industrial owners and workers regarding the importance of implementing OSH in the workplace. Therefore, the application of OSH in IKM, especially in the Cikarang industrial center, must be effective and optimal to increase the productivity and competitiveness of the industrial center. The purpose of this study was to assess the application of occupational safety and health with the HAZOP method in the Cikarang Brick Industry Center. This research is a quantitative research with a descriptive analytic design. The research objects are four brick industries in the Cikarang brick industry center. The stages in this research are hazard identification and risk assessment in industrial centers using the HAZOP method for potential work accident hazards. The results of this study obtained the findings of several risks with an extreme risk level of 17% with 3 very risky sources of danger, for high risk of 66% with 14 sources of high hazard, and a moderate risk of 17% with 3 sources of low hazard. The conclusion of this study is that there are 20 potential hazards that can occur with high risk potential or high risk which has the most potential with a total of 14 sources of danger.

Downloads

Download data is not yet available.

References

Anwar, C., Tambunan, W., & Gunawan, S. (2019). Analisis Kesehatan Dan Keselamatan Kerja (K3) Dengan Metode Hazard and Operability Study (Hazop). Journal of Mechanical Engineering and Mechatronics, 4(2), 61–70.

Erdiansyah, E. (2018). Kontribusi industri kecil tahu dalam bidang pembangunan bagi masyarakat Kelurahan Mabar Kecamatan Medan Deli. Universitas Islam Negeri Sumatera Utara Medan.

Hartoyo, E., Sholihah, Q., Fauzia, R., & Rachmah, D. N. (2015). Sarapan pagi & produktivitas. Universitas Brawijaya Press.

Haslindah, A., Andrie, A., Aryani, S., & Hidayat, F. N. (2020). Penerapan Metode HAZOP Untuk Keselamatan Dan Kesehatan Kerja Pada Bagian Produksi Air Minum Dalam Kemasan Cup Pada PT. Tirta Sukses Perkasa (CLUB). Journal Industrial Engineering & Management (JUST-ME), 1(1), 20–24.

Hutagalung, V. E. (2021). Kecelakaan Kerja yang Dialami Pekerja yang Sedang Dalam Keadaan Work From Home. Jurist-Diction, 4(2), 775–790.

Ketenagakerjaan, B. P. J. S. (2018). Laporan Terintegrasi 2018.

Nando, R. N., & Yuamita, F. (2021). Analisis Kesehatan dan Keselamatan Kerja dengan Metode Hazard dan Operability Pada Area Kerja Lantai Produksi CV. Lebu Berkah Jaya. Journal of Industrial Engineering UPY, 1(1).

Purnama, D. S. (2015). Analisia Penerapan Metode Hirarc (Hazard Identification Risk Assessment and Risk Control) Dan Hazops (Hazard and Operability Study) Dalam Kegiatan Identifikasi Potensi Bahaya Dan Resiko Pada Proses Unloading Unit Di Pt. Toyota Astra Motor. None, 9(3), 182893.

Rudyarti, E. (2017). Hubungan Pengetahuan Keselamatan Dan Kesehatan Kerja Dan Sikap Penggunaan Alat Pelindung Diri Dengan Kejadian Kecelakaan Kerja Pada Pengrajin Pisau Batik Di Pt. X. Jurnal Kesehatan Masyarakat, Vol. 2, No(1), 13. http://repo.stikesicme-jbg.ac.id/4395/13/PROSIDING-SEMNAS-K3.pdf#page=21