Analysis of The Line Balancing Assembly Implementation  to Increase Productivity

Kurbandi Satpatmantya Budi Rochayata; Wening Ken Widodasih

doi:10.55927/ijba.v3i3.4658

Authors

Kurbandi Satpatmantya Budi Rochayata Pelita Bangsa University
Wening Ken Widodasih Pelita Bangsa University

DOI:

https://doi.org/10.55927/ijba.v3i3.4658

Keywords:

Cycle Time, Line Balancing Assembly, Productivity

Abstract

This research was conducted at PT. TRIN which produces automotive spare parts. The Line Balancing Assembly method is used to minimize the time needed to complete one unit of product. This research was conducted by collecting primary data and conducting interviews with workers at each work station. The results of the study show that the application of the Line Balancing Assembly method can increase productivity at PT. TRIN on the X30 production process originally the number of production reached 26 pcs/hour , after the Line Balancing Assembly method was applied it became 28 pcs/hour or an increase of 7.70%. This study provides recommendations for other companies wishing to increase productivity by applying similar methods to their processes.

Downloads

Download data is not yet available.

References

Ahmad Yunus Nasution, Sulis Yulianto, Nurul Ikhsan. 2018 . Implementation of the Quality Control Circle Method for Increasing Production Capacity propeller Shaft at PT XYZ. Sintek: Machine Journal Technology

Chakraborty, S., & Ghosh, S. (2017). Assembly Line Balancing: A Review and Bibliography. International Journal of Industrial Engineering Computations, 8(1), 1-20.

Fagundes, GHS, & Lazzarotto, MS (2016). Assembly line balancing: A case study in the automotive industry. International Journal of Production Economics, 183, 414-424.

Karabulut, Y. (2016). A study on line balancing of an automotive assembly line. International Journal of Engineering Research and Development, 12(6), 44-48.

Li, Y., Yang, T., & Li, B. (2020). Assembly line balancing problem considering operation interruption probability. Computers & Industrial Engineering, 142, 106342.

Moccia, L., & Ottaviano, E. (2015). A genetic algorithm for the multi-objective assembly line balancing problem. International Journal of Production Research, 53(8), 2359-2371.

Nahmias, S. (2009). Production and Operations Analysis. McGraw-Hill Education.

Ni, J., & Zhang, X. (2015). Hybrid Line Balancing Optimization for Mixed-Model Assembly Lines. Journal of Manufacturing Systems, 34, 114-121.

Peng Chen, Ting Yuan, Qinfeng Sun, Lili Jiang, Hongmin Jiang, Zhenkun Zhu, Zexin Tao Haiyan Wang and Aiqiang Xu. 2016. Role Of Quality Control Circle In Sustained improvement Of Hand Hygiene Compliance: An Observational Study In A Stomatologyhospital In Shandong, China

Ramesh, M., & Ramesh, B. (2015). A review of assembly line balancing techniques and algorithms. Journal of Industrial and Production Engineering, 32(1), 67-81.

Sahay, BS, & Sharma, P. (2019). Assembly line balancing problem: A review. Journal of Industrial Engineering International, 15(2), 159-184.

Slamet Riadi, Haryadi. 2019. Pengendalian Jumlah Cacat Produk Pada Proses Cutting Dengan Metode Quality Control Circle (QCC) Pada PT. Toyota Boshoku Indonesia (TBINA). Journal Industrial ManufacturingVol. 4, No.1,Januari2019, pp. 27-36

Supriatin. 2018. Pengaruh Gugus Kendali Mutu (Gkm) Dan Budaya Kerja Terhadap Kinerja Karyawan Di Departement Engineering Work Shop PT. Muliakeramik Indahraya Tbk. Cikarang. Widya CiptaVol II No. 1 Maret 2018

Togar W. S. Panjaitan, Debora A. Y. A., Marissa Yessicha. 2011. Minimalisasi Kekurangan Material Melalui Implementasi Quality Control Circle. Jurnal Teknik Industri, Vol. 13, No. 2, Desember2011, 101-106

Tri Susilo. 2018. Application of Quality Control Circles Using the Deming Prize to Control and Improve Product Quality at the Intako Cooperative. Industrial Engineering FTI-UPN "Veteran" East Java

Widhy Wahyani, Intan Maria Ulfa. 2013. Implementation of the Plan Do Check Action (PDCA) Cycle in Quality Management in Soft Drink Products. Cyber-Techn. Vol 8 No 1.

Yusof, SM, Jaafar, H., & Mat Saad, N. (2013). Assembly line balancing for mixed-model assembly line: A case study. Procedia Engineering, 53, 462-471.

Zhang, J., & Wang, Y. (2018). An efficient algorithm for mixed-model assembly line balancing problems. Journal of Intelligent Manufacturing, 29(3), 659-670.